MHS DUN WORK!!!!!!!!!!

[JumP]

LoL Now nothin of MHS work anymore 14 15 16 dun work always x-trap detect ... SOme1 have same problem???!!

[lo_Y]

yeah me 2 so we all should say wtffffffffffff!!!!!!!!!!!

[Bakusan]

yeah me too i dunno why.....i change this in modify self but x-trap detecdet this T_T

[woffie]

Lol, yep. WT patched it. Sad.

[L. Spiro]

Do me a favor and run MHS, then run Xtrap, then play WolfTeam normally without doing anything in MHS. Do not attach to WolfTeam.


If nothing happens after 6 minutes and 32 seconds, attach MHS to explorer.exe.

Report back on the results.


L. Spiro

[aznprime]

ok i did what u said and wolfteam didnt close. i attached to explorer.exe after 8-9 minutes and WT still run. hope this info helps

[Silv3rShi3ld]

I have some exstra information... wolfteam only detect you if you change values... it doestn detect MHS... only the way what change the values.. i dont know really mutch about coding but i think you must change the way how MHS change values...

[L. Spiro]

If anyone else can verify this it means there is a CRC check implementation in Xtrap, which is what others have said, but most people claim it closes as soon as MHS attaches, indicative of hooks.


L. Spiro

[Silv3rShi3ld]

sorry for my question L.spiro but what is CRC??? Nice work what you do By the way with MHS my great compliments!!!

[hgtshf]

Do me a favor and run MHS, then run Xtrap, then play WolfTeam normally without doing anything in MHS. Do not attach to WolfTeam.


If nothing happens after 6 minutes and 32 seconds, attach MHS to explorer.exe.

Report back on the results.


L. Spiro

may i ask you what do i do next?
1. open MHS
2.don touch anything and play wolfteam
3.normally for 8mins
4.alt tab to MHS
5.open process explorer.exe
6.now what?

[Silv3rShi3ld]

it wasnt a way to bypass it.. but l.spiro wanted to know what the result were of that... we must wait for the great solution or release be pacient

[hgtshf]

L spiro coming out another MHS new version?? i support you man.

and yes when attached to explorer.exe wolfteam never close lol.

[aznprime]

I have some exstra information... wolfteam only detect you if you change values... it doestn detect MHS... only the way what change the values.. i dont know really mutch about coding but i think you must change the way how MHS change values...

i dunno perhaps its only on ur pc, but for me, when i attached MHS to WT then it closes! i dont think xtrap patched MHS when u change values, because i cant even attached to WT!

[mezzo]

sorry for my question L.spiro but what is CRC??? Nice work what you do By the way with MHS my great compliments!!!

It means the software makes a checksum of it's own memory and compares it to a certain value.
If you have changed anything, they checked value will no longer be correct..
this way the program knows you have been messing around in memory.

[liqmysaq]

ok i did what u said. attached to explorer.exe after about 8 mins of play with MHS open and attached to nothing. it attach to explorer.exe fine.

i only get detected when i attach to wolfteam. i can attach and close MHS real quick and use some of the hacks from my table without being detected. if i dont close MHS within 1 or 2 seconds then im detected. i can also hack other things with MHS while xtrap is open without any problems (including Xtrap).