Memory Hacking Software

by **fabsyi** » Thu Jun 19, 2008 6:52 am

Hi,
I am having an issue with the Code Filter in 4.0.19. I try to load calc.exe, go into Code Filter, add a new filter, then click "go". When I move my mouse over the calculator window, the whole program just crashes. I've tried this numerous times and I can't get it to work.
In 4.0.18 this worked fine. Any suggestions L. Spiro?

Another question, when I load a program, using Open for Debug, and ticking the "Pause After Load" tickbox, I am then unable to load the Code Filter, it just freezes the program when I choose the Menu Option. I am trying to run a code filter on a console application that quickly spits out some output on startup then quits itself. I can't open it normally, because it would have quit by the time I go into code filter.
Do you have any suggestions on how I could go about doing this, as "Pause after Load" method doesn't seem to work with the Code Filter.

Thanks for your time.

by **L. Spiro** » Thu Jun 19, 2008 12:25 pm

I did not do anything that would cause that target program to crash more often but MHS does now. I will fix it when I find out why.
If you get crashes in the target process, use Settings/Include and uninclude some types of functions.

I have not tested it with Pause After Load and will see what the problem is and fix it soon.

L. Spiro

by **fabsyi** » Thu Jun 19, 2008 9:00 pm

The following is some info on the MHS crash I got when running the Code Filter in 4.0.19 if it is of any help to you.

Crash module: MHS.exe
Crash location: 4dc492
Crash type: Access violation - eax was used as a pointer when eax was equal to 0.

The disassembly listing showed this location to be a few instructions after a call to QueryPerformanceCounter().

Hope some of this may be useful to you in finding the problem.

by **colintso** » Mon Jun 30, 2008 5:53 pm

L. Spiro,

I am encountering a problem with the code filter too, but it is different. Everytime when I attach to a program and start code-filtering, MHS just crashes and the opened process crashes, not only calc.exe, but winmine.exe and other windows games. I don't know what has happened, but I have not encountered the same problem before.

colintso

by **L. Spiro** » Mon Jun 30, 2008 6:05 pm

Settings/Include
Disable Guesses and Exports.

L. Spiro

by **Atlantis** » Thu Jul 31, 2008 7:08 pm

I tried to use Codefilter but it breaks system completely. Neither turn off functions didn't help (then nothing was recorded by codefilter), nor turn on functions (then system crashed, hung completely, hard reset was needed).

Any ideas?

by **L. Spiro** » Thu Jul 31, 2008 7:21 pm

You need to specify operating system and processor type.

L. Spiro

by **Atlantis** » Thu Jul 31, 2008 9:03 pm

WinXP SP3 32 bits
I use AMD 64 3000+

by **L. Spiro** » Thu Jul 31, 2008 9:29 pm

Use it on smaller processes such as Minesweeper and see if the result is the same.

L. Spiro

by **Atlantis** » Thu Jul 31, 2008 10:21 pm

Tried on Total Commander and Notepad results are same - crash of mhs and aimed processes. I tried various options, guesses, exports ect. Still same crashes.

by **L. Spiro** » Fri Aug 01, 2008 9:15 am

Try it with none of them checked.

L. Spiro

Memory Hacking Software

Problem with Code Filter in 4.0.19

Problem with Code Filter in 4.0.19

Who is online